Kenwood SPECTRUM 350 Manuale Utente

1Setting up yourKenwood Audio SystemSpectrum 350

Use the following parts list to identify missing or damaged parts:SRC-406C SRC-406NItem Description Quantity Part No. Part No.A Left side panel 1 XW10

Stacking your components in the rackTo make sure that they’re properly ventilated and stable,stack them according to the following diagram. If you’reu

Important: Please wait until you’ve connectedall of the cables before plugging anyof the components into AC walloutlets and turning them on.Connecting

Connecting your CD player, cassette deck, and optional turntable or VCRUse the cables that came with the audio and video components. You can connect a

Using the AM indoor loop antenna (supplied)Place the antenna as far away as possible from the main system, television,speaker wires and power cords.Ro

15.Using an AM outdoor antenna (optional)If you’re using the AM loop antenna, but reception is poor, run a vinyl-coatedwire of more than 20 feet outdo

16.Connecting the system control cablesConnect the system control cables as shown below. Be sure to push the plugs all the way in.TAPECDRECOUTPLAYINOU

17.You can connect a graphic equalizer or similar component to your SPEC-TRUM System.Remove the shorting plugs from the ‘Adapter’ jacks, and connect t

18.KX-W595KR-596DP-R896SWITCHEDTOTAL 200 WATTS MAX.Important: Make sure you followthese instructions carefully whenyou plug in the power cords. If the

If you’ve connected all of the powerand system control cables as we’veshown, you can turn on the powerto the entire system from thereceiver.• Press th

2.LicensingManufactured under license from Dolby LaboratoriesLicensing Corporation. Additionally licensed under oneor more of the following patents: U

20.CONGRATULATIONS!Your SPECTRUM System is ready to go! Now, look at the ‘Using yourKenwood Spectrum Audio System’ manual to operate your system. Have

21.WarrantyWrite the serial numbers (they’re on the back of eachunit, along with the model number) in the space below.If you need to call your dealer

KENWOOD USA CORPORATIONPO Box 22745Long Beach, California 90801-5745

Using yourKenwoodAudio SystemSpectrum 3502F. P. O.

Welcome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Using the controls. . . . . . . . . . . . . . . . . . . . . . . . .

4.Now that you’ve set up your SPECTRUM system, thereal fun begins! Operating your system is easy, if youfollow the step-by-step instructions in this m

7.Using the controlsFront panel controls6.AM-FM STEREO RECEIVER KR-596 AUTO TUNING SYSTEM 30 STATION RANDOM PRESETBASSFLAT22446688+10-10TREBLEFLAT22

9.Reading the display8.AUTO TUNEDSTEREOMEMORYFMAMMHzKHz chMUTINGAUTO indicatorSTEREO indicatorMEMORY indicatorTUNED indicatorBAND indicator FREQUENCY

If the receiver doesn’t respondwhen you press a button on theremote, you need new batteries.We recommend replacing bothbatteries at the same time for

You can increase or decrease the volume level in 1 decibel (dB) increments. The display shows the decibellevel change.Adjusting from the front panelTu

Safety first3.WARNING:TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOTEXPOSE THIS UNIT TO RAIN OR MOISTURE.Safety SymbolsWe’ve placed these safety symbols on

You can turn the speakers ON or OFF (for example, touse headphones) with the SPEAKERS button.1 Press the SPEAKERS button (while they are off) toturn t

Tuning stations automaticallyYou can automatically find the strongest radio station signals.1 Select the TUNER input.2 Press the BAND button to select

Scrolling from the front panelYou can scroll through all preset stations in sequence.1 Select the tuner input.2 Press the P.CALL (Preset Call) button.

21.Using the CD playerThe front panel controls and display20.MULTIPLE COMPACT DISC PLAYER DP-R896POWERP.MODETIME DSP RANDOM REPEATCHECKEDITMODECLEARON

Please read the following instruc-tions carefully to help preventdamage to your CD player and yourCDs.Compatible CDsYour CD player plays standard 5”CD

Playing from the front panel1 Make sure that the PGM (Program Mode) light is OFF. If the PGM light is ON, press the P.MODE button.2 Select the CD usin

To check a programPress the CHECK button. Each time you press thebutton, you see the CD and track numbers in the orderyou programmed them on the displ

You can repeat a single CD, all loaded CDs, or thecontents of a program.Repeating a single CD1 Press the STOP button.2 Press the P.MODE button. The PG

31.Using the cassette deckThe front panel controls and display30./II/IIB RECORDING/PLAYBACKAPLAYBACK ONLYREC PLAY REW FF STOP/EJECT PAUSEPLAY REW FF S

Please read the following instruc-tions carefully to help preventdamage to your cassette tapes.Preventing accidentalrecording on pre-recordedtapeTo pr

Do not use the unit on a bed, sofa, rug orsimilar surface that may block the ventila-tion openings. This unit should not beplaced in a built-in instal

Recording a tape1 Put a blank tape in tape-well B.2 Press the PAUSE button, and then press the REC andPLAY buttons simultaneously.3 Set the input of t

Sometimes things just don’t seem to be working right. When this happens:• First, look back over this manual to find the instruc-tions for what you’re t

• Make sure that Dolby Noise Reduction isn’t activatedwhen playing tapes recorded with no Dolby NoiseReduction.Recordings are distorted• The recording

Cassette deck(KX-W595)FormatTrack system: 4 track, 2 channelRecording system: AC bias (105 kHz)HeadsWell-A: Playback head x 1Well-B: Record/playback h

KENWOOD USA CORPORATIONPO Box 22745Long Beach, California 90801-5745F.P.O.

Safety First. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Welcome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setting up your SPECTRUM Systemisn’t difficult, but getting your systemup and running will be even easier ifyou follow the step-by-step direc-tions in

Assembling the rack7.Hardware listBefore assembling your rack check to be sure that youreceived all of the hardware listed below.JKLMNSQORTUVW81212129

8.Step 3Kick PanelStep 4Ox 2Rack topMallet (not included)Kx 2MNStep 5Qx 6Step 6Step 7Rack topKx 10Top of panel shouldbe 1/2" below topedge of rac

9.Step 8TScrews facetoward the insideof the rackGlass door (top)Step 9Step 10Step 11UTop edge ofkick panelVWFirst close the door to see where the magn